CUBIC (CR-CC)

• Finned batteries:

Constructed with 1/2" diameter copper tubing, manufactured according to CUPROCLIMA® specifications, and corrugated aluminum fins. They achieve high efficiencies.

The fin pitch is 4.5 mm in the CR series and 7 mm in the CC series.

All batteries are leak tested at a test pressure of 3,923 kPa (40 kg/cm2) and then pressurized with nitrogen to 147 kPa (1.5 kg/cm2) to prevent corrosion of the inner surface of the copper tubes.

• Bodywork:

It is made of aluminium and magnesium alloy sheet (Al 97.5% – Mg 2.5%) which gives it high resistance to corrosion even in extreme environmental conditions.

Both the defrost trays and the side body panels are easily removable, making access to the interior of the appliances quick and easy.

• Fans and motors:

The fans used are (depending on the model) Ø 250, 315 or 350 mm. equipped with single-phase motors (230 V @ 50 Hz.) or three-phase motors (230 V / 400 V @ 50 Hz).

• Defrost resistors:

They are shielded with stainless steel tubing, their terminals are vulcanized onto the tubing to prevent leakage, and they incorporate individual grounding.

They are strategically located in the evaporator in order to facilitate adequate and uniform defrosting.

Electrical resistors included in CC series, optional in CR.

• Fin Material
  • Copper Fin
  • Lacquered Fin

• Housing
  • Aluminum
  • Graffiti
  • Stainless steel

• Defrost
  • Hot gas defrost
  • Hot gas defrost in battery and electric defrost in tray
  • Electric defrost (only for CR)
  • Water defrost
  • Resistance rings on the fan

• Others
  • Blygold Treatment
  • High Efficiency Fans

• Refrigerants
  • R134a, R404A, R407F, R448A, R449A, R507
  • Glycolated Water
  • CO2

• Cubic Evaporators Catalog